High Resolution, Plug & Play Infrared Camera for Machine Vision
The A320 is an affordable and accurate solution for machine vision and automation systems that require non-contact imaging and temperature measurements. It is a complete machine vision and remote monitoring system that immediately identifies thermal problems that would otherwise go undetected. Its built-in logic makes it ideal for safety/security systems, and for product and process monitoring in quality/reliability assurance programs.
Check out these great features:
• Affordable, Fully-integrated Thermal Measurement Solution
• Multiple Target Spots and Alarms
• Plug-and-Play Compatibility
• Real-time Analog and MPEG-4 Digital Video Output
• LabView and C++ / Visual Basic Support
• Multiple Users can Access Data from Multiple Cameras
• Maintenance-free, Uncooled, Microbolometer Detector
Find Faults Quickly
Finding and resolving problems early can save thousands of dollars by resolving safety issues, cutting down on scrap and warranty costs, and improving product quality. The A320 can spot subtle temperature variations undetectable by any other means. These can be easily monitored with its thermal imaging, temperature alarms, and actual temperature readouts.
Instant Non-contact Temperatures
The A320 is designed to deliver accurate thermographic imaging and repeatable temperature measurements in a wide range of automation applications. Each thermal image is built from 76,800 individual picture elements that are sampled by the camera's on-board electronics and software to measure temperature. The near-real-time 16-bit 320x240 image data can be used to monitor and help control a production process, or can be processed by the camera's on-board intelligence to autonomously generate multiple independent digital alarms. Fast data transmissions are facilitated by using the MPEG-4 compressed image format.
Outstanding Imaging and High Thermal Sensitivity
From the beginning, the A320 was developed to deliver accurate radiometric imaging and repeatable temperature measurements. It features an advanced, uncooled microbolometer focal plane array (FPA) detector that delivers crisp, longwave images in a multitude of palettes. Temperature variations as small as 0.08 °C can be detected.
Extensive Connectivity Options
Multiple A320s can be networked through their 100baseT Ethernet connections, and synchronized through the SNTP protocol. Each camera can be assigned a unique IP address for detection and data exchange on a network. FLIR's IR Monitor software can be used with a PC for camera control, configuration and monitoring via the network. This also provides instant access to A320 thermal images and temperature data by any authorized user via LAN/WAN. In addition, alarm messages and images can be sent by email to a remote location using the SMTP or FTP protocol. Wireless connection options are also available.
Plug-and-play Setup
The A320 features plug-and-play setup. Simply connect the camera to a PC monitor and immediately view high quality, real-time radiometric thermal images that accurately show heat patterns and thermal anomalies. Alternatively, images can be viewed on a standalone video monitor by using the camera's composite video output (NTSC or PAL).
Easy to Configure and Operate
The user-intuitive A320 is extremely easy to operate. Its onboard logic and menu-driven controls enables users to select and manipulate multiple target spots, temperature range, image color palettes, multiple alarms and more - quickly and easily. Adding IR imaging to a machine vision system is no more complex than adding a visual image camera. Moreover, the A320 provides a simple way to create command and control programs through its bundled IR Config and IR Monitor software modules.
Easier Program Development
FLIR supplies multiple tools for developing customized programs that help monitor and control processes with the A320 Series. These include the ThermoVisionTM LabVIEW® Digital Toolkit and ThermoVisionTM System Developers Kit (SDK). In addition, the Digital Toolkit enables the easy creation of a machine vision or measuring application with a FLIR IR camera within National Instruments LabVIEW programming environment. The SDK is an ActiveX component with methods, properties and events that allows Visual Basic/C++ developers to control FLIR cameras and convert incoming IR images to temperature images.
Ultra-compact, Rugged and Lightweight
Built to operate unattended for long periods in harsh industrial environments, the A320 has an IP40 rating. Its compact design and light weight (less than 2 lbs.) allow it to be mounted in remote locations that may be optimal for data collection. By taking advantage of Power Over Ethernet (POE) capabilities, local power supplies are not needed. Fully configurable GPIO and V-sync functionality allows the A320 to be integrated quickly and easily into machine vision and automation systems.
 Click to download brochure
|
High Resolution, Plug & Play, GigE Infrared Camera System for Machine Vision!
The affordable A320G is designed for integration into machine vision and automation systems that require non-contact imaging and temperature measurements. It operates similar to a sophisticated visual cameras used in industrial applications, and has standard interfaces for easy deployment and connection to back-end systems and networks via Gigabit Ethernet.
The A320G is an affordable way to add thermographic imaging and non-contact temperature measurements to machine vision systems. Adding this IR functionality is no more complex than adding a visual image camera, and provides a similar level of flexibility in developing the command and control program.
Check out these great features:
• GenICam and GigE Compliant
• Plug-and-Play Compatibility
• Third Party Software Compliant (NI Vision Builder, IMAQ, Common Vision Blox, Visual Basic, Visual C++, etc.)
• Supported by FLIR Software Packages
• Precision Non-contact Temperature Measurements
• Maintenance-free, Uncooled, Microbolometer Detector
• Longwave Imaging Performance
• Compact, Rugged, and Lightweight
Accurate Non-contact Temperature Measurement
The A320G is designed to deliver accurate thermographic imaging and repeatable temperature measurements in a wide range of applications. Each thermal image is built from over 76,000 individual picture elements that are sampled by the camera's on-board electronics and firmware. The data can then be used to monitor and help control a production process or automation system.
Easy Plug and Play Operation
The A320G is an ideal system integration solution due to its universal plug and play (uPnP) protocol and GigE Vision Control protocol. Simply connect the camera to a PC and produce high-quality near-real-time thermographic images. With a standard PC interface, the camera can be fully configured from the PC, allowing command, control and collection of full frame data from the A320G in real time.
Gigabit Ethernet Data Transfer
The A320G Researcher is equipped with an RJ-45 Gigabit Ethernet connection that supplies 16-bit 320x240 images at 60 Hz, and linear temperature data. These signals are compatible with any software that is GenICam compliant.
Precise Timing and Control
There are separate digital I/O connections to eliminate communication latencies in timing and control. Two types of optically isolated connections are provided. The GPIO allows digital-in for shutter disable, and digital-out for program control. There is also a V-sync connector for triggering and synchronization.
Compact, Rugged, and Lightweight
Compact and lightweight, the powerful A320G fits easily into most machine vision and automation systems. Its straightforward 3-sided mounting allows quick installation, and it can be easily moved when application requirements change.
Tailored To Your Application
As with all its products, FLIR Systems offers a complete series of accessories, including close-up and wide-angle lenses, to suit the most demanding applications. The A320G is supported by a variety of FLIR software packages, including Researcher 2.9 for R&D or as a pre-configured Automation HMI, Software Developer's kit for Visual Basic and Visual C++ programming and LabView Toolkit for seamless compatibility with National Instruments LabView software.
Click to download brochure |
The most affordable, feature rich infrared camera available!
The new ThermaCAM® T360 is the most affordable feature rich infrared camera available! The T360 now has FLIR FUSION! FLIR's new FUSION functionality allows for easier identification and interpretation of infrared images. This advanced technology enhanced the value of an infrared image by allowing you to overlay it directly over the corresponding visible image. The functionality combines the benefits of both the infrared image adn visual picture at the push of a button. The T360 camera does this in real-time and the overlay function can be easily adjusted to suit any application such as electrical surveys, building diagnostics, and mechanical inspections.
-
Thermal Fusion Functionality
-
Interchangeable Optics
-
1.3 MegaPixel Visual Camera
-
Automatically Associates the Visual and Thermal JPEG Images
-
Includes FREE QuickReport Software for Analysis & Reporting
-
Compatible with Optional Microsoft Word®-Based ThermaCAM Reporter Software w/Spell Check
-
Removable SD/Memory Card, USB & Video Out
-
Onscreen Thumbnail Image Gallery
-
Auto Hot/Cold Spot & Audible/Visual Alarms
-
Large 3.5" Color LCD Display
-
High Thermal Sensitivity for Maximum Temperature Accuracy
-
Built-in LaserLocatIR™
-
Long 4-Hour Battery with In-Camera Charging or Car Charger
-
Optics head & display screen are independently rotatable for optimum viewing
-
Holster for Portability and Easy Access to Camera
-
Target Illuminator and 1.3 Mega Pixel Visual Camera
-
Tiltable Optics Reduces Back and Arm Strain
-
Touch Screen Text/Sketch Functionality
Click to download brochure |
The most affordable, feature rich infrared camera available!
The new ThermaCAM® T400 is the most affordable feature rich infrared camera available! The T400 now has FLIR FUSION! FLIR's new FUSION functionality allows for easier identification and interpretation of infrared images. This advanced technology enhanced the value of an infrared image by allowing you to overlay it directly over the corresponding visible image. The functionality combines the benefits of both the infrared image adn visual picture at the push of a button. The T400 camera does this in real-time and the overlay function can be easily adjusted to suit any application such as electrical surveys, building diagnostics, and mechanical inspections.
-
Thermal Fusion Functionality
-
Interchangeable Optics
-
1.3 MegaPixel Visual Camera
-
Automatically Associates the Visual and Thermal JPEG Images
-
Includes FREE QuickReport Software for Analysis & Reporting
-
Compatible with Optional Microsoft Word®-Based ThermaCAM Reporter Software w/Spell Check
-
Removable SD/Memory Card, USB & Video Out
-
In camera Emissivity Tables, 5 Temperature Spots & Delta T Functionality
-
Touch Screen Technology Adds Markers, Draw, Sketches
-
Auto or Manual Focus with 8x Continous Digital Zoom
-
Auto Hot/Cold Spot & Audible/Visual Alarms
-
Large 3.5" Color LCD Display
-
High Thermal Sensitivity for Maximum Temperature Accuracy
-
Voice, Text & Sketch Annotation
-
Built-in LaserLocatIR™
-
Optics head & display screen are independently rotatable for optimum viewing
-
Holster for Portability and Easy Access to Camera
-
Target Illuminator and 1.3 Mega Pixel Visual Camera
-
Tiltable Optics Reduces Back and Arm Strain
-
Touch Screen Text/Sketch Functionality
Click to download brochure |
