The CG320 (384×288 resolution) and the CG640 (640×480 resolution) models have two different outputs. CVBS analogue video data from a BNC port and temperature raw data of each pixel from the Ethernet port.
All of the CG series thermography models are supplied with PC software.
For easy analysis with temperature raw data from the thermal camera via the Ethernet.
Improvements
Better Image Quality
More stable operation in lower and higher temperatures
Better measurement accuracy
Supports Giga Ethernet
Added functions in Alarm setting and ROI settings
Compact design
Control of the lens for focus and zoom is done by the camera

PC Software for CG Series Radiometric Cameras




Thermal Report

Camera Controller
With the camera controller, the user has access to the camera via the Ethernet, to change different settings.

Alarm Management Software
The alarm management software then starts to record for set period of time (alarm recording). It will pop up the corresponding channel to show an image in bigger size with the ROI showing with a different frame colour where the measured temperature exceeds the set temperature. At the same time, as the measured temperature exceeded the set temperature, it is displayed at the location in the ROI. In addition to the alarm signal and related activities in the alarm management software on the PC, the corresponding camera can also issue an alarm signal, and the user must then take action when the alarm signal is issued, for example, a warning lamp flashing with a certain alarm sound.

As show in the above configuration, the customer can use a mix of CCTV network cameras and CG320-IP/CG640-IP thermal network cameras, as many as required in the project. VuRix VMS is in operation in many sites in Korea with up to several thousands of network cameras.